Studer

Sofarsolar
Power Master

SeeLevel
Bogart
Votronic
EP Solar

AA Solar and Sun Power Plus Header

Home
Products
Prices
FAQ's
Contact Us
Specials
Downloads


V O T R O N I C
S O L A R   C O N T R O L L E R S




 

Votronic MPP165,  MPP250, MPP350,  MPP430 - 12V duo

Votronic MPP Accessories

Click here for pricing

 
Back to Top


Votronic MPP165, MPP250, MPP350, MPP430 Duo for 12 VDC


 
 

MPP250                     


The Votronic MPP Duo range are advanced MPPT type Solar Controllers
that can charge two different battery banks at once from the same Solar Panel/s

Ideal for Motorhomes and Boats where you have an engine battery and a house battery

Votronic MPP Duo controllers have an electronic protection against
overcharging, overload, overheating and reverse currents at night

  They have 2 battery charging ports for charging 2 separate battery banks simultaneously
with one bank being charged fully, and the other receiving a trickle charge.
Ideal for keeping your house batteries at full, and making sure your start battery is full also.

Adjustable charging programs to suit flooded acid, Gel and AGM batteries. The MPP165, MPP250, and MPP 350 now come with programs for most types of Lithium Batteries too.

LED's to indicate the charging state
Full, >80%, Charging MPPT mode, Low Voltage

Temperature compensation when used with the optional Temperature Sensor

Can be used only on a 12V system


MPP165
MPP250 MPP350 MPP430
Max. Solar Power
165W
250W 350W 430W
Max. Solar Voltage
50V
50V
50V
TBC
Max. Solar Current
10A
15A 21A TBC
Battery System Voltage
12V
12V
12V
TBC
Max. Charge Current - House Battery
12A
18A 25.5A TBC
Max. Charge Current - Start Battery
1A
1A
1A
TBC
Dimensions
131 x 77 x 40mm
131 x 77 x 40mm 131 x 77 x 40mm TBC
Weight
190g
210g 250g TBC

Click Here for the User Manual for the MPP165, MPP250 and MPP350

Click Here for the User Manual for the MPP420

An optional LCD Monitor is available to go with these solar controllers

Click here for a PDF of specifications for Votronic MPP controllers


Back to Top


Votronic MPP Accessories





Temperature Sensor (2001)

This temperature sensor is a good extra for your Votronic Controller, as it will allow the unit to

compensate for environment temperature variations

Comes with 2m length cable, which is easy to connect to your controller


Sensor end has a hole suitable for up to an M8 size screw for mounting


 

Votronic LCD Solar Monitor
LCD Solar Monitor (1250)

This monitor can display Watts, Amps and Volts


The measuring ranges are:

Solar Current (A), Battery Voltage (V), Solar Power Counter (0-9999W),
Solar Status (Sun symbol), Charge Status,
Solar Capacity (% of maximum, and 10 Bar Graph)

Size (front panel): 80 x 85 x 24mm

Opening Electronic System: approx. 66 x 72mm
Weight: 55g

Connects to your Votronic MPPxxx controller via an RJ-11 cable (comes with 5m)




Back to Top

Updated September 2016