You cannot add "LCD Charge Control Display S-VCC by Votronic" to the cart because the product is out of stock.

VCC Range Charge Converter by Votronic

Name: VCC Range Charge Converter by Votronic
SKU: 1127
Availability: InStock

$419.00 – $870.00

The VCC range of Charging Converters from Votronic are compact and lightweight battery-to-battery (DC-DC) chargers designed to charge your leisure battery from your alternator whilst on the move.

The highly efficient charging technology means that better use can be made of the alternator’s charging capability (up to 50A can be passed), resulting in significantly reduced charging times and more complete charging

Input Voltage (V)

Charge Capacity (V/A)

Clear

Description

The VCC range charge converter from German leisure electronics specialist Votronic is a compact and lightweight battery-to-battery (DC-DC) charger designed to charge your leisure battery from your alternator whilst on the move. The highly efficient charging technology means that better use can be made of the alternator’s charging capability (up to 50A can be passed), resulting in significantly reduced charging times and more complete charging. Even during short journeys a high level of recharge is possible, with a deep and full recharge achieved during longer journeys. Alternator voltage fluctuations and surge currents are eliminated which protects your leisure battery and connected consumers from harm, and the multi-stage charging profiles ensure your battery can never be over-charged. It features fully automatic operation and the starter and leisure batteries are electrically isolated when the vehicle’s engine is off, ensuring you cannot drain one battery from the other.

It can be fitted to vehicles with either standard or Euro 6 ‘smart’ alternators and the selectable charging profiles mean it can be used with any type of lead-acid battery, as well as lithium LiFePO4 batteries. The Integrated Vehicle Power Supply Filter ensures that parallel charging sources (e.g. battery chargers, solar, generators etc.) can be used on the same battery without any issues and the unit can trickle charge your starter battery with a small ‘bypass’ current when your leisure battery is connected to a mains-powered charger. A battery temperature sensor is also included that can be used to optimise the charging voltages based on the ambient temperature.

Features of VCC Range Charge Converter

High charging capacity, already within short distances
Significantly improved energy balance of the supply circuit
Outstanding protection of the supply battery and the connected consumers against sometimes very strong voltage fluctuations of dynamically controlled dynamos of newer vehicles
During longer distances, the IU1oU2 charging technology achieves full charging and overcharging is reliably excluded
Optimised characteristic lines of charging adjustable for 4 battery types by battery selector switch (acid, gel, two times AGM)
Automatic, adjustable power control giving priority to charging of the starter battery by the dynamo in case of strong loaded vehicle mains to ensure that the vehicle can be started at any time
In case of simultaneous consumption during parallel and floating operation, charging of the battery is continued or trickle charging is effected. Calculation and control of the adaptation of the charging time is effected automatically by the charging converter
The integrated temperature compensation automatically ensures the individual adaptation of the charging voltage to the battery temperature independently of the dynamo. Battery temperature sensor, Art.-No 2001, is required
Simple installation, no interventions in the starter circuit required. The unit is switched into the charging cable to the supply battery
The connection of a Remote Control S, Art.-No. 2075, or Remote Indicator IP67, Art.-No. 2081, or Charger State Monitor IP67, Art.-No. 2082, plug-in type, is provided and can easily be realised
Also suitable for an operation with EBL (electroblock) and EVS (only VCC 1212-25 and VCC 1212-45 IUoU)
Integrated on-board mains suppression filter ensures unproblematic parallel operation of solar systems, mains chargers and other charging sources at one battery
Galvanic isolation between input and output ensures absolute separation of the battery circuits for outstanding suppression of failures, for neat ground ratio on both sides, also with long supply cables, safety in case of failure (puncture 12 V/24 V or 24 V/12 V is not possible) and reliably avoids undesirable back discharge of the battery circuits
Control input for fully automatic controlled operation (ignition, D+ motor running) or optionally manual control by remote switch
If required, the measuring input allows a pure voltage control of the unit
The application range of the unit also covers perfect battery charging in great distance of the dynamo in large vehicles, trailers, supply containers etc.

VCC Range Charge Converter Technical Details:

Unit type	MPN	Input Voltage max. Current (V/A)	Charging Capacity (V/A)	Battery Capacity (V/A)	Characteristic Lines of Charging (adjustable)		Type
					Lead-Acid, Gel,
					AGM 1, AGM 2	LiFePO4

B2B Charging Converters without galvanically isolation

VCC 1212-20 C	3321	12V (10.5-16.5) 20A	12 / 24	50 – 160 / 200	Y	Y	A
VCC 1212-30	3324	12V (10,5-16,5) 39A	12 / 30	60 – 200 / 260	Y	Y	A
VCC 1212-50	3326	12V (10,5-16,5) 68A	12 / 50	75 – 320 / 440	Y	4-fold	B
VCC 1212-70	3328	12V (10,5-16,5) 95A	12 / 70	100 – 460 / 620	Y	4-fold	B
VCC 1212-90	3329	12V (10,5-16,5) 125A	12 / 90	150 – 600 / 800	Y	4-fold	B

B2B Charging Converters with galvanically isolation

VCC 1212-25 IUoULi	3306	12V (11-16) 37A	12 / 25	50 – 170 / 220	Y	Y	C
VCC 1212-45 IUoU-Li	3308	12V (11-16) 63A	12 / 45	90 – 300 / 400	Y	Y	C
VCC 1212-45 Li	3307	12V (11-16) 63A	12/ 45	90 – 300 / 400	–	4-fold	C
VCC 1224-25 IUoU	3311	12V (11-16) 68A	24 / 25	50 – 170 / 220	Y	–	C
VCC 2424-25 IUoU	3313	24V (22-32) 33A	24 / 25	50 – 170 / 220	Y	–	C
VCC 2412-25 IUoU-Li	3314	24V (22-32) 18A	12 / 25	50 – 170 / 220	Y	Y	C
VCC 2412-45 IUoU-Li	3315	24V (22-32) 30A	12 / 45	90 – 300 / 400	Y	Y	C
VCC 2412-45 Li	3309	24V (22-32) 30A	12 / 45	90 – 300 / 400	–	4-fold	C

Charging Programs:

	Gel: Charging Program for Gel Batteries, Characteristic Line IU1oU2 Adapted to closed, gas-tight gel/dryfit batteries with determined electrolyte, which are generally requiring a higher charging voltage level and longer dwell times U1 to achieve short charging times with particularly high capacity storage and to avoid total discharge. Also recommended for EXIDE MAXXIMA a high-current battery in AGM filament technology.
	AGM: Charging Program for AGM/Fleece Batteries, Characteristic Line IU1oU2 Adapted to charging closed, gas-tight AGM (absorbed glass mat) batteries and batteries in lead-fleece technology requiring a particularly high level U1 with adapted dwell times for full charging and after that a moderate level U2 for trickle charge (round cell and plate technology).
	UNIVERSAL: Charging Program for Lead, Acid/Lead-Acid Batteries: Characteristic Line IU1oU2 Universal program for charging and conservation of charge of acid batteries in vehicles (mixed operation mobile/stationary). Still offers short charging times, good charging factor and good acid mixing with average level U1 for open and closed, low-maintenance, maintenance-free standard, drive, lighting, solar and heavy duty batteries.
	LiFePO4: Charging Program for Lithium Batteries, Characteristic Line IU1oU2 Charging program for lithium LiFePO4 batteries with completely integrated electronic system and safety circuit (BMS).