Tracer-AN Series MPPT Solar Charge Controller (50A-100A) by Epever

$435.00$930.00

Epever’s Tracer-AN Series MPPT Solar Charge Controller for large currents up to 100A. This Tracer can be used for a wide range of applications such as RV, household systems and field monitoring.

AA Solar is NZ’s only Authorised Distributor and Service Agent for genuine Epever Solar Charge Controllers.

Models: Tracer5420AN, Tracer6420AN, Tracer8420AN, Tracer10420AN

Clear

Description

Tracer-AN Series MPPT Solar Charge Controller (50A-100A)

Epever’s Tracer-AN Series MPPT Solar Charge Controller is for large currents up to 100A.  That is based on a multiphase synchronous rectification technology (MSRT) and an advanced MPPT control algorithm by Epsolar.  Featuring a dual-core processor architecture and common negative design, features.  These include: speed and reliability and high industry standards. This tracer can be used for a wide range of applications such as RV, household systems and field monitoring.

FEATURES (50A – 100A)

  • CE certification (LVD EN/IEC62109, EMC EN61000-6-1/3),
  • Advanced MPPT technology by Epsolar .
  • Ultra-fast tracking speed with tracking efficiency no less than 99.5%,
  • Maximum DC/DC transfer efficiency is as high as 98.6%. * full load efficiency no less than 98%(*Tracer 10415AN@48V system).
  • State-of-the-art MPPT control algorithm, which will minimise the MPP loss rate.
  • Highly accurate measurement of multiple-peaks MPP.
  • Wide range of MPP operating voltages.
  • Auto control system to limit the charging power, and overcharging.
  • Supports 4 charging options: Sealed, Gel, Flooded and user.
  • Suitable for lead-acid and lithium batteries.
  • Battery temperature compensation function.
  • Real-time energy recording function.
  • Automatic over-temperature power reduction function.
  • Caters for up to 6 units in parallel to expand system
  • Load relay controls external load switch signal to deliver diversified load work modes
  • First and the second disconnection of load control, contain two relay’s contact.
  • Auto-control of utility and generator relay design
  • Utility or generator auto-control relays make it easy to compose the hybrid power system.
  • Remote temperature and the voltage sensor will collect accurate data of battery temperature and voltage
  • Isolated RS485 with 5VDC/200mA to protect output for no power devices with MODBUS protocol
  • Can monitor or set parameters by using a phone app or PC software.

TECHNICAL SPECIFICATIONS

ModelTracer5420ANTracer6420ANTracer8420ANTracer10420AN
Nominal System voltage12/24/36/48 VDC or Auto12/24/36/48 VDC or Auto12/24/36/48 VDC or Auto12/24/36/48 VDC or Auto
Rated Charge Current50A60A80A100A
Max. PV Open Circuit Voltage200V
180V
200V
180V
200V
180V
200V
180V
MPP Voltage Range(Battery Voltage +2V)~144V(Battery Voltage +2V)~144V(Battery Voltage +2V)~144V(Battery Voltage +2V)~144V
Max. PV input power (W/V)625/12
1250/24
1875/36
2500/48
750/12
1500/24
2250/36
3000/48
1000/12
2000/24
3000/36
4000/48
1250/12
2500/24
3750/36
5000/48
Equalize Charging VoltageSealed 14.6V, Flooded: 14.8V, User -defined 9~17VSealed 14.6V, Flooded: 14.8V, User -defined 9~17VSealed: 14.6V, Flooded: 14.8V, User -defined 9~17VSealed: 14.6, Flooded: 14.8V, User-defined 9~17V
Boost Charging VoltageGel:14.2V, Sealed:14.4V, Flooded: 14.6, User-defined 9~17VGel:14.2V, Sealed:14.4V, Flooded: 14.6, User-defined 9~17VGel:14.2V, Sealed:14.4V, Flooded: 14.6, User-defined 9~17VGel:14.2V, Sealed:14.4V, Flooded: 14.6, User-defined 9~17V
Float Charging VoltageGel/Sealed/Flooded: 13.8V, User-defined 9~17VGel/Sealed/Flooded: 13.8V, User-defined 9~17VGel/Sealed/Flooded: 13.8V, User-defined 9~17VGel/Sealed/Flooded: 13.8V, User-defined 9~17V
Low Voltage Reconnect VoltageGel/Sealed/Flooded: 12.6V, User-defined 9~17VGel/Sealed/Flooded: 12.6V, User-defined 9~17VGel/Sealed/Flooded: 12.6V, User-defined 9~17VGel/Sealed/Flooded: 12.6V, User-defined 9~17V
Low Voltage Disconnect VoltageGel/Sealed/Flooded: 11.1V, User-defined 9~17VGel/Sealed/Flooded: 11.1, User-defined 9~17VGel/Sealed/Flooded: 11.1, User-defined 9~17VGel/Sealed/Flooded: 11.1, User-defined 9~17V
Tracking Efficiency>99.5%>99.5%>99.5%>99.5%
Temp. Compensate-3m/VC/2V (default)
Self-Consumption98mA/12V;60mA/24V;50mA/36V;46mA/48V
GroundingCommon negative grounding
RS485 InterfaceRS485(RJ45)
Working Environment Temperature-25C~+60C
Relative Humidity Range5% to 95% (N.C)
EnclosureIP20
Dimensions (LxWxH)(mm)261x216x119340x236x119394x240x134394x242x143
Weight3.5kg4.5kg6.1kg7.4kg

 

MANUFACTURER SPECIFICATIONS & CERTIFICATES

Tracer-AN(50-100A) User Manual

Additional information

WeightN/A
DimensionsN/A
Amps

50A, 60A, 80A, 100A

Downloads

Tracer-AN(50-100A) User Manual

EPEVER-Datasheet-Tracer-AN(50-100A)

PT-ADP-PORT-Manual (1)

EPEVER Tracer AN_Main_Pres